Our range of blind layouts
We offer a diverse range of blind layouts and operating options for our custom blinds. Our cordless blinds are especially child-safe as they have no pull cords! Browse through the various door and window blind options below to find the best fit for your requirements.
For all blinds, you can select between four different rail colours – white, black, silver or bronze. With the exception of the transparent Sensuna designer operating handle (for cordless options), all plastic parts (rail caps, tension clips etc.) match the rails in colour. Plastic accessories are black for bronze rails. Tension cords and pull cords for the blinds are supplied in colours that match your chosen blind fabric.
The adjustable rails of cordless blinds are moved with an operating handle attached directly to the rail. On request, two operating handles can be attached to adjustable rails in blinds wider than 1200 mm.
For windows above comfortable reaching height, we also recommend purchasing an extender rod to operate the adjustable rails of the blinds. A single extender rod can be used for several window blinds.
All our cordless blinds (and some cord-operated blinds) are laterally braced to keep them from swaying, which make them particularly suited as blinds for tilt & turn windows as they follow the movement of the window when opening and closing. Due to the forces at work resulting from the braced design, adjustable rails may bend slightly if the blind width exceeds 1000mm. To minimise this effect, we recommend opting for the Sensuna® rail+ should a cordless blind be 1000mm or wider. These blind rails are slightly higher than the standard blind rail (21mm instead of 17mm) and have additional internal reinforcement. We also recommend a maximum blind width of 1350 mm for cordless top-down/bottom-up blinds (model P1615) if selecting a heavier blind fabric (e.g. block-out pleated or honeycomb fabric), as there may be a slight bowing of the upper and lower rails beyond this width.
All our blinds layouts adhere to norms regulating child safety for operating cords of window treatments. Our cordless blinds do not have any operating cords, but are adjusted with operating handles fixed to the rails. These are a good choice when installing blinds in your child’s bedroom.
Keep in mind that not all blind layouts are suited to all window types. For example, full-height windows may not have suitable reveals at the base for the attachment of lateral bracing cords used to tension cordless blinds. In this instance, free-hanging cord-operated blinds may be more suitable. If more than two blinds are to be mounted immediately next to each other, cordless blinds are more practical as no pull-cords will be left dangling between the blinds.
For details regarding mounting options for various window layouts and materials, click here.
Rectangular Windows
Oddly shaped windows(triangles, trapezoids and more)
Plissee Blinds in Auckland can supply window blinds for odd shaped windows such as blinds for triangular windows. Adequate sun protection and climate regulation are vital for winter gardens, sunrooms, ceiling windows and conservatory glass roofs. The layouts shown below are the same as those for upright windows, but with tension cords made from sturdy UV-resistant plastic coated steel wires for extra strength.
P3634
Cordless, laterally braced trapezoid ceiling blind with one slanted side and adjustable upper rail
Rectangular windows
P1600 – Cordless, laterally braced blind with fixed upper rail and adjustable lower rail
This is our best-selling window blind product due to its flexibility in controlling both privacy and light. Both blind rails can be smoothly adjusted via the operating handles. This style of cordless window blind is suitable for rectangular windows of all kinds, depending on the chosen mounting option. Lateral bracing making this window blind style particularly suited to mounting on the window frame or glazing bead of tilt & turn windows, as it will follow any movement without swaying. On request, two operating handles can be attached to the rails in blinds wider than 1200 mm.
Operation: Operating handles on upper and lower rails (extender rod can be purchased if required)
Blind width options:
- 200 – 1500 mm (at max. 1500 mm height)
- up to 1200 mm (at max. 2200 mm height)
- List Item 3
NOTE: We recommend a maximum width of 1350 mm for heavier blind fabrics such as block-out fabrics (pleated blind fabric and honeycomb blind fabric), as there may be a slight bowing of the upper and lower blind rails beyond this width.
Height options: 200 – 2200 mm
Blind mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Horizontal Mounts
- Window mount:
- Horizontal Mounts (in the glazing bead)
- Slim Fit Mounts (in the glazing bead)
- Glazing Bead Mounts (on the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1615 – Cordless, laterally braced blind with adjustable upper and lower rails (top-down/bottom-up style)
This is our best-selling window blind product due to its flexibility in controlling both privacy and light. Both blind rails can be smoothly adjusted via the operating handles. This style of cordless window blind is suitable for rectangular windows of all kinds, depending on the chosen mounting option. Lateral bracing making this window blind style particularly suited to mounting on the window frame or glazing bead of tilt & turn windows, as it will follow any movement without swaying. On request, two operating handles can be attached to the rails in blinds wider than 1200 mm.
Operation: Operating handles on upper and lower rails (extender rod can be purchased if required)
Width options:
- 200 – 1500 mm (at max. 1500 mm height)
- up to 1200 mm (at max. 2200 mm height)
Height options: 200 – 2200 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Horizontal Mounts and Fixing Clips
- Window mount:
- Horizontal Mounts and Fixing Clips (in the glazing bead)
- Slim Fit Mounts (in the glazing bead)
- Glazing Bead Mounts (on the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1700 – Cord-operated, freehanging blind with fixed upper rail and adjustable lower rail
This free hanging blind has a stationary upper rail and an adjustable lower rail that is operated using the blind pull cord that can be placed on either side. A pull cord stop ensures that the blind can be positioned freely.
Operation: Operating cord at right or left side
Width options: 300 – 2200 mm
Height options: 200 – 2600 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1705 – Cord-operated, freehanging (laterally braced) blind with fixed upper rail and adjustable lower rail
This free hanging blind is identical in operation to P1700, but has additional lateral bracing leading downwards from the stationary upper rail. This stabilises the blind if there is air movement, and makes it a good choice of blind for tilt and turn windows as it also keeps it from swaying when the windows are opened, if mounted directly to the window. The window blind is operated using a pull cord that can be placed on either side.
Operation: Operating cord at right or left side
Width options: 300 – 2200 mm
Height options: 200 – 2600 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Horizontal Mounts and Fixing Clips
- Window mount:
- Horizontal Mounts and Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1710 – Cord-operated, freehanging window blind fixed upper rail and adjustable middle and lower rails
P1710 is a free hanging top-down/bottom-up pleated blind layout that allows flexibility in use and position for larger windows. It can cover window surfaces of up to 5,7 m². The two flexible rails are moved via separate pull cords, one on each side of the blind. Pull cord stops on both sides of the window blind allow the upper as well as the lower rail to be moved to and held in any desired position. A third, static rail on the upper end of the window blind is used to install the blind on the ceiling, the window lintel or the glazing bead simply using mounting clips or using them in combination with face bracket mounts. As with all our pleated window blinds you can choose from an extensive range of blind fabrics as well as four different colors for blind mounting rails: White, aluminium, black and bronze. Plastic parts match the chosen color of the rails with the exception of the Sensuna design handle, which is transparent. Also, plastic parts for brass rails are black.
Operation: Operating cord at right and left side
Width options: 300 – 2200 mm
Height options: 200 – 2600 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1620 – Cordless, laterally braced Duo blind with two fabrics, fixed upper rail and adjustable middle and lower rails
This duo day and night blind combines two fabrics in one blind for extra functionality. One half of the blind is light blocking and the other half of the blind fabric is light filtering. Its upper rail remains stationary, both blind fabrics are joined together by an adjustable middle rail and the lower rail is also adjustable. This concept gives you the freedom of opening and closing both fabrics together or independently, each being long enough to cover the whole surface of the window on its own. The blind is laterally braced so if mounted directly to the window, it will follow any movement of tilt & turn windows without swaying. The dual-fabric blind is suitable for rectangular windows of all kinds, depending on the chosen blind mounting option. On request, two operating handles can be attached to the rails in blinds wider than 1200 mm.
Operation: Operating handles on middle and lower rails (extender rod can be purchased if required)
Width options:
- 200 – 1500 mm (at max. 1500 mm height)
- up to 1200 mm (at max. 2200 mm height)
Height options: 200 – 2200 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Horizontal Mounts and Fixing Clips
- Window mount:
- Horizontal Mounts and Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1720 – Cord-operated, freehanging Duo blind with two fabrics, fixed upper rail and adjustable middle and lower rails
This cord-operated Duo blind combines two fabrics in one blind for extra functionality, offering blinds that can filter light or block light. Its upper blind rail remains stationary, both blind fabrics are joined together by an adjustable middle rail and the lower rail is also adjustable. Each blind fabric is operated separately with its own pull-cord. This concept gives you the freedom of opening and closing both fabrics together or independently, each being long enough to cover the whole surface of the window on its own.
Operation: Operating cord at right or left side
Width options: 300 – 2200 mm
Height options: 200 – 2600 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1725 – Cord-operated, freehanging (laterally braced) Duo blind with two fabrics, fixed upper rail and adjustable middle and lower rails
This free hanging Duo two-fabric blind is identical in operation to P1720, but has additional lateral bracing leading downwards from the stationary upper rail. This stabilises the blind if there is air movement, and also keeps it from swaying on opened tilt & turn windows if mounted directly to the window. The lower bracing is attached to a Horizontal Mount or Face Bracket Mount via a cord tensioner.
Operation: Operating cord at right or left side
Width options: 300 – 2200 mm
Height options: 200 – 2600 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Horizontal Mounts and Fixing Clips
- Window mount:
- Horizontal Mounts and Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
Blinds for rectangular ceiling and sunroom windows
P3600 – Cordless wire-braced blind with fixed upper and lower mounting rails, and additional adjustable lower rail
This is the ceiling blind or sunroom blind version of the P1600 model, with an additional blind mounting rail on the bottom. This cordless window blind can be mounted completely horizontally (up to 90° tilt angle), and will remain rigid even in large-sized windows due to its additional wire reinforcement. Its black plastic-coated steel wire tensioners are 1mm in diameter and UV resistant. The window blind can be either recess mounted into the window reveal, or face mounted on the architrave. One side of the window blind can be smoothly adjusted via the operating handle (an extender rod may be required for high windows).
Operation: Operating handle on lower rail (extender rod can be purchased if required)
Width options: 300 – 1500 mm
Height options: 200 – 4000 mm
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximium window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts and Fixing Clips
- Recess mount: Fixing Clips (ceiling)
P2616 – Cordless ‘Comfort’ blind with fixed lateral rails, and adjustable upper and lower rails
The ‘Comfort’ blind range is ideal for darkening rooms, especially in combination with black-out honeycomb fabrics, as the lateral rails block light from entering along the sides of the blinds. The lateral rails are supplied in the same colour options – white, black, bronze and silver – as the upper and lower rails. Both upper and lower blind rails can be smoothly adjusted via the operating handles (an extender rod may be required for high windows). Mounting of ‘Comfort’ blinds is simple: the lateral rails are simply screwed into the window reveal and the blind’s cord tensioners are then attached to already built-in mounting clips. These window blinds are a great choice for room darkening blinds.
Operation: Operating handles on upper and lower rails (extender rod can be purchased if required)
Width options: 200 – 1500 mm
Height options: 200 – 1500 mm
Minimum window reveal breadth: 38 mm (plus adequate air gap)
Maximium window tilt angle: 60°
Mount options:Screw-fastening of lateral rails (Recess mount)
P2601 – Cordless ‘Comfort’ blind with fixed lateral and upper rails, and adjustable lower rail
The ‘Comfort’ blind range is ideal for as a room darkening window blind, especially in combination with black-out honeycomb fabrics, as the lateral rails and the covered upper rail block light from entering along the sides and top of the blind. The lateral rails are supplied in the same colour options – white, black, bronze and silver – as the upper and lower rails. The lower rail can be smoothly adjusted via the operating handle (an extender rod may be required for high windows). Mounting of ‘Comfort’ blinds is simple: the lateral and upper rails are simply screwed into the window reveal and the blind’s cord tensioners are then attached to already built-in mounting clips.
Operation: Operating handle on lower rail (extender rod can be purchased if required)
Width options: 200 – 1500 mm
Height options: 200 – 1500 mm
Minimum window reveal breadth: 38 mm (plus adequate air gap)
Maximium window tilt angle: 60°
Mount options:Screw-fastening of lateral and upper rails (Recess mount)
P2621 – Cordless ‘Comfort’ Duo blind with fixed lateral and upper rails, and adjustable middle and lower rails
This blind combines the versatility of the Duo blind with the optimal room-darkening properties of the ‘Comfort’ range, allowing a combination of light filtering blind and light blocking blinds. The upper blind rail remains stationary, both blind fabrics are joined together by a moveable middle rail and the lower rail is also moveable. This window blind concept gives you the freedom of opening and closing both fabrics together or independently, each being long enough to cover the whole surface of the window on its own. The lateral rails and the covered upper rail block light from entering along the sides and top of the blind. Mounting of ‘Comfort’ blinds is simple: the lateral and upper rails are simply screwed into the window reveal and the blind’s cord tensioners are then attached to already built-in mounting clips.
Operation: Operating handle on lower rail (extender rod can be purchased if required)
Width options: 200 – 1500 mm
Height options: 200 – 1500 mm
Minimum window reveal breadth: 38 mm (plus adequate air gap)
Maximium window tilt angle: 60°
Mount options:Screw-fastening of lateral and upper rails (Recess mount)
Oddly shaped windows
P1636 – Cordless, laterally braced, right triangle blind with adjustable upper rail
This cordless window blind has a stationary lower rail and is operated via a narrow adjustable upper rail. An additional stationary rail is mounted on the slanting side of the window blind for extra stability, and its braced design allows it to follow any movement of tilt & turn windows without swaying when mounted directly on the window frame sash or glazing bead. Because the adjustable upper rail has a width of 70 mm, a small gap will remain at the top of the window when the blind is closed. The right angle of the blind can be on the right or left hand side.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options: 300 – 1200 mm
Height options: 200 – 2000 mm
Slope range: minimum 15° – maximum 80°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1637 – Cordless, laterally braced, isosceles triangle blind with adjustable upper rail
This cordless blind is perfect choice for gable window blinds. It has a stationary lower blind rail and is operated via a narrow adjustable upper rail. Additional stationary rails are mounted on each slanted side for extra stability. Because the adjustable upper rail has a width of 70 mm, a small gap will remain at the top of the window when the blind is closed.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options:
- 300 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
Height options: 300 – 2000 mm
Slope range: minimum 15° – maximum 70°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1740 – Cord-operated, freehanging, right triangle blind with fixed slanted upper rail and adjustable lower rail
This window blind is suited to right triangle windows with the right angle in a lower corner (right or left hand side). The slanted blind rail is fixed while the lower rail can be pulled up into the slant using the pull cord that is situated on the long vertical side of the triangle. A pull cord stop ensures that the blind can be positioned freely, and the Sensuna® kids care cord breaker provides extra child-safety.
Operation: Operating cord at upper corner
Slanted width options:
- 300 – 2000 mm (to 60° slope)
- up to 2200 mm (to 30° slope)
Height options: 300 – 1700 mm
Slope range: minimum 5° – maximum 60°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1741 – Cord-operated, freehanging, right triangle blind with fixed and adjustable upper rails, and fixed slanted lower rail
This triangular window blind is suited to right triangle windows with the right angle in an upper corner (right or left hand side). The horizontal upper rail and slanted lower blind rail are fixed while an adjustable rail can be pulled down using the pull cord that is situated on the long vertical side of the triangle. A blind pull cord stop ensures that the blind can be positioned freely, and the Sensuna® kids care cord breaker provides extra child-safety for window blinds.
Operation: Operating cord at upper corner of long vertical side
Slanted width options:
- 500 – 2000 mm (to 60° slope)
- up to 2200 mm (to 30° slope)
Height options: 200 – 1700 mm
Slope range: minimum 5° – maximum 60°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1043 – Fixed right triangle blind
This triangular window blind is fixed (cannot be opened) so is ideal for window glazing that requires permanent privacy or darkening. It is suited to right triangle windows (right or left hand side) and can be flipped vertically depending on whether the horizontal edge is at the top or bottom of the window. Both the slanted upper and horizontal lower rails are mounted with fixing clips. This allows for easy removal of the blind.
Operation: none
Slanted width options:
- 400 – 2000 mm (to 60° slope)
- up to 2200 mm (to 30° slope)
Height options: 200 – 1500 mm
Slope range: minimum 5° – maximum 60°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1650 – Cordless, laterally braced trapezoid blind with slanted fixed upper rail, fixed middle rail and adjustable lower rail
P1650 is the perfect window blind fit for trapezoid windows with a slanted upper side. The trapezoid window blind consists of a fixed upper triangular component and an adjustable rectangular component beneath that can be moved up and down via an operating handle on the lower rail. The blind can be made with the slope on either the left or right hand side. (If you require the blind to be pulled past the middle rail and into the upper sloped rail, consider the cord-operated freehanging P1751 or P1752 layouts).
Operation: Operating handle on lower rail (extender rod can be purchased if required)
Width options:300 – 1500 mm
Longer height options: 200 – 2600 mm
Shorter height options:
- 100 – 1500 mm (at max. width 1500 mm)
- up to 2600 mm (at max. width 1200 mm)
Slope range: minimum 5° – maximum 60°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips and Horizontal Mounts
- Window mount:
- Fixing Clips and Horizontal Mounts (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1751 and P1752 – Cord-operated, freehanging trapezoid blind with slanted upper edge and adjustable middle and lower rails
P1751 and P1752 are the cord-operated versions of the P1650 window blind for trapezoid shaped windows. Two parts (triangular and rectangular) are connected by a middle rail and are operated via two separate pull cords located either on both sides of the window blind (P1751) or both on the shorter side of the blind (P1752). Unlike layout P1650, the middle rail is not fixed, so the blind can be pulled right up into the slant to sit adjacent to the upper sloped rail.
Operation: Two operating cords on both sides of the blind (P1751) or both on the shorter side of the blind (P1752).
Width options:300 mm to (see slanted width options)
Slanted width options:
- 300 – 2000 mm (at 60°)
- up to 2200 mm (at 30°)
Longer height options: 200 – 2600 mm
Shorter height options: 100 – 2600 mm (at max. width 2200 mm)
Slope range: minimum 5° – maximum 60°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
P1634 – Cordless, laterally braced trapezoid blind with one slanted side and adjustable upper rail
This blind fits trapezoid windows with one slanted lateral side. Rails on three sides are mounted with fixing clips; an additional upper blind rail is adjustable for operating the blind from the top (narrow side). The blind can be made with the slope on either the left or right hand side.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options:
- 300 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
- (min. width for narrow side is 85 mm
Height options: 300 – 2000 mm
Slope range: minimum 15° – maximum 80°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1635 – Cordless, laterally braced trapezoid blind with two slanted sides and adjustable upper rail
This blind fits trapezoid windows with two inward slanted lateral sides. Rails on all four sides are mounted with fixing clips; an additional upper blind rail is adjustable for operating the blind from the top (narrow side).
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options:
- 300 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
- min. width for narrow side is 100 mm
Height options: 300 – 2000 mm
Slope range: minimum 15° – maximum 70°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1662 – Cordless, laterally braced pentagonal blinds with adjustable upper and middle rails
This window blind is suited to pentagonal windows that can be seen as a linked combination of a trapezoid and a rectangle. It features adjustable top and middle rails and a fixed lower rail, so the window blind can be opened fully towards the bottom. Fixed mounting rails for the upper trapezoid section provide extra stability. The blind can be made with the slope on either the left or right hand side.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Lower width options:
- 200 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
Upper width options: 85 – 1450 mm
Width offsets: 50 mm min. – 1200 mm max.
Longer height options: 200 – 2000 mm
Shorter height options:
- 100 – 1500 mm (at max. 1500 mm width)
- up to 1900 mm (at max. 1200 mm width)
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1663 – Cordless, laterally braced hexagonal blind with adjustable upper and middle rails
This blind is well suited to hexagonal window blinds that can be seen as a linked combination of a trapezoid and a rectangle. It features adjustable top and middle rails and a fixed lower rail, so the blind can be opened fully towards the bottom. Fixed mounting rails for the upper trapezoid section provide extra stability.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Lower width options:
- 300 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
Upper width options: 100 – 1400 mm
Width offsets (per side): 50 mm min. – 700 mm max.
Longer height options: 200 – 2000 mm
Shorter height options:
- 100 – 1500 mm (at max. 1500 mm width)
- up to 1900 mm (at max. 1200 mm width)
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1082 – Fixed 90° (quarter-circle) window blind
This window blind is fixed (cannot be opened) so is ideal for window glazing that requires permanent privacy or darkening. It is suited to right-angled quarter-circle windows (right or left hand side). Both straight edges are mounted with fixing clips and the curved edge is additionally fixed with small hooks for which eyelets are integrated into the fabric. This allows for easy removal of the blind.
Operation: none
Width options:200 – 1000 mm
Height options: 200 – 1000 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
P1086 – Fixed 180° (semi-circle) blind
This semi-circular window blind is fixed (cannot be opened) so is ideal for window glazing that requires permanent privacy or darkening. It is suited to semi-circular windows. Two straight edge blind rails are mounted with fixing clips and the curved edge is additionally fixed with small hooks for which eyelets are integrated into the fabric. This allows for easy removal of the blind. The width of the window blind is precisely double the blind height.
Operation: none
Width options:200 – 1500 mm
Height options: 200 – 750 mm
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
- Window mount:
- Fixing Clips (in the glazing bead)
- Face Bracket Mounts (on the window frame sash)
Oddly shaped ceiling blinds and sunroom window blinds
P3634 – Cordless, laterally braced trapezoid ceiling blind with one slanted side and adjustable upper rail
This window blind is the ceiling window blind version of P1634, with additional steel wire tension cords to keep it taut even in a horizontal position. It fits trapezoid windows with one slanted lateral side. Rails on three sides are mounted with ceiling fixing clips; an additional upper rail is adjustable for operating the blind from the top (narrow side). The window blind can be made with the slope on either the left or right hand side.
Operation: Operating handle on narrow rail (extender rod can be purchased if required)
Width options:300 – 1500 mm
(min. width for narrow side is 85 mm) Height options: 200 – 2000 mm
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
P3635 – Cordless, laterally braced trapezoid ceiling blind with two slanted sides and adjustable upper rail
This ceiling window blind is the ceiling window version of P1635, with additional steel wire tension cords to keep it taut even in a horizontal position. This ceiling blind fits trapezoid windows with two inward slanted lateral sides. Rails on all four sides are mounted with ceiling fixing clips; an additional upper rail is adjustable for operating the blind from the top (narrow side).
Operation: Operating handle on narrow rail (extender rod can be purchased if required)
Width options:300 mm – 1500 mm
(min. width for narrow side is 100 mm) Height options:200 mm – 2000 mm
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
P3636 – Cordless, laterally braced, right triangle ceiling blind with adjustable upper rail
This ceiling window blind is the ceiling window version of P1636, with additional steel wire tension cords to keep it taut even in a horizontal position. It has a stationary lower rail and is operated via a narrow adjustable upper rail. An additional stationary rail is mounted on the slanting side for extra stability. Because the adjustable upper rail has a width of 70 mm, a small gap will remain at the top of the window when the blind is closed. The right angle of the blind can be on the lower right or left hand side.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options:300 mm – 1200 mm
Height options:300 mm – 2000 mm
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
P3637 – Cordless, laterally braced, isosceles triangle ceiling blind with adjustable upper rail
This ceiling blind is the ceiling window version of P1637, with additional steel wire tension cords to keep it taut even in a horizontal position. It has a stationary lower rail and is operated via a narrow adjustable upper rail. Additional stationary rails are mounted on each slanted side for extra stability. Because the adjustable upper rail has a width of 70 mm, a small gap will remain at the top of the window when the blind is closed.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Width options:
- 200 – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
Width offsets:50 mm min. – 1200 mm max.
Height options:300 mm – 2000 mm
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
P3650 – Cordless, laterally braced trapezoid ceiling blind with fixed slanted upper, middle and lower rails, and additional adjustable lower rail
This ceiling blind is the ceiling window blind version of P1650, with additional steel wire tension cords to keep it taut even in a horizontal position. The ceiling window blind consists of a fixed upper triangular component and an adjustable rectangular component beneath that can be moved up and down via an operating handle on the lower adjustable rail. The ceiling blind can be made with the slope on either the left or right hand side.
Operation: Operating handle on lower rail (extender rod can be purchased if required)
Width options:300 – 1500 mm
Slanted width options:
- up to 2000 mm (to 60° slope)
- up to 2200 mm (to 30° slope)
Longer height options:300 mm – 2500 mm
Shorter height options:200 mm – 2400 mm
Slope range:5° – 60°
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts
- Recess mount: Fixing Clips
P3662 – Cordless, laterally braced pentagonal ceiling blind with adjustable upper and middle rails
This ceiling blind is the ceiling window blind version of P1662, with additional steel wire tension cords to keep it taut even in a horizontal position. The ceiling window blind can be seen as a linked combination of a trapezoid and a rectangle. The blind features adjustable top and middle rails and a fixed lower rail, so the window blind can be opened fully towards the bottom. Fixed mounting rails for the upper trapezoid section provide extra stability. The blind can be made with the slope on either the left or right hand side.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Lower width options:
- 200 mm – 1200 mm (at max. 2000 mm height)
- up to 2600 mm (at mx. width 1200 mm)
Upper width options:85 mm – 1450 mm
Width offsets:50 mm min. – 1200 mm max.
Longer height options:200 mm – 2000 mm
Shorter height options:
- 100 mm – 1500 mm (at max. 1500 mm width)
- up to 1900 mm (at max. 1200 mm width)
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- 100 mm – 1500 mm (at max. 1500 mm width)
- up to 1900 mm (at max. 1200 mm width)
P3663 – Cordless, laterally braced hexagonal ceiling blind with adjustable upper and middle rails
This ceiling or sunroom blind is the ceiling window blind version of P1663, with additional steel wire tension cords to keep the blinds taut even in a horizontal position. The ceiling blind can be seen as a linked combination of a trapezoid and a rectangle. The window blind features adjustable top and middle rails and a fixed lower rail, so the blind can be opened fully towards the bottom. Fixed mounting rails for the upper trapezoid section provide extra stability.
Operation: Operating handle on upper rail (extender rod can be purchased if required)
Lower width options:
- 300 mm – 1200 mm (at max. 2000 mm height)
- up to 1500 mm (at max. 1500 mm height)
Upper width options:85 mm – 1400 mm
Width offsets (per side):50 mm min. – 1200 mm max.
Longer height options:200 mm – 2000 mm
Shorter height options:
- 100 mm – 1500 mm (at max. 1500 mm width)
- up to 1900 mm (at max. 1200 mm width)
Minimum window reveal breadth: 100 mm (adequate air gap)
Maximum window tilt angle: 90°
Mount options:
- Face mount: Face Bracket Mounts and Fixing Clips (ceiling)
- Recess mount: Fixing Clips (ceiling)